How do I fix AT mobile network state disconnected?
The problem of a mobile network state that says disconnected or not available is common with android phone users….Reset The Network
- The first step would be to select a location on your home screen.
- Then click on the general settings.
- Select the best option found in the public vote and set the network back.
Why is my phone saying disconnected?
In some cases, the mobile networks state is disconnected because the phone was not activated by the carrier. Anyone who is carrying a phone and expecting a particular carrier’s network should know for certainty that the phone’s SIM card was activated correctly.
Why is my service state out of service?
One of the reasons a Samsung or Android device may show “No Service” is because it’s connected to a disabled cellular radio signal. This fix isn’t quite as easy as navigating menus or holding down buttons; but it’s not rocket science, either.
What are AT APN settings?
Heads up: Some older Android smartphones may use the wap. cingular APN as the default AT setting….Android device data settings.
| Data settings | Smartphones (5G-Capable) | Smartphones (5G Standalone-Capable) |
|---|---|---|
| MMSC | http://mmsc.mobile.att.net | Not set |
| MMS proxy | proxy.mobile.att.net | Not set |
| MMS port | 80 | Not set |
| MCC | 310 | 310 |
Why is my phone not connecting to a network?
To do this, go to settings and tap on “Wireless Networks” or “Connections.” From there, switch on Airplane mode and turn off your phone. Wait for half a minute and then turn your mobile phone back on. Go to the same settings section and turn off Airplane mode. After that, check if your mobile data is working again.
What is the APN number for AT?
After applying the new settings, be sure to save them, and then select one. If you still find they don’t work, try rebooting your phone….How To Find To Your APN Settings To Change Them.
| APN Name | ATT Broadband |
|---|---|
| MCC | 310 |
| MNC | 410 |
| Authentication Type | None |
| APN Type | default,mms,supl,hipri,fota |
Why is my Samsung not connecting to network?
Restart your Android phone. Rebooting your device will clear out any temporary conflicts preventing you from connecting to the network. Turn off Wi-Fi. Disable Wi-Fi on your phone, wait for 30 seconds, then turn it back on.
Why mobile network not available on Samsung Galaxy phones?
The steps below have been proven to be a solution for MOBILE NETWORK NOT AVAILABLE problem on most Samsung galaxy handsets. The problem can most likely be a lack of reception within your area.
How to delete user data from Samsung Galaxy S20 5G?
or Turn off your device. Next, hold down the Home, Power, and Volume Up button all together for few seconds till Android logo appears on the screen. Release the buttons then the use volume down button for highlighting any options and Power key to confirm it. Next, select ‘Delete all user data’ and confirm it.
Why is my Android phone not registered on the network?
And selected network unavailable on Android. This issue may not be a nulled or an invalid IMEI # problem because the IMEI number is incorrect. If you have a nulled IMEI number and need to fix not registered on a network, read: The steps below have been proven to be a solution for MOBILE NETWORK NOT AVAILABLE problem on most Samsung galaxy handsets.
How to fix “mobile not available on network error?
Most people are facing “error while searching for network.” This problem is caused by your SIM card not appropriately placed. Hence, the mobile not available on network error may also occur. To fix this issue, navigate to: While you are in mobile settings, you have to hold the power button and the home buttons together until your device turns off.