How do I find my WWN number HP-UX?
Re: Command to know WWN of HBA on hp UX. You need to run the ioscan to find out the name of your card, then run the fcmsutil.
How do I find my WWN number HP server?
- Log into ILO either directly or via the blade enclosure.
- Go to the Information tab of your server.
- WWN id can be found under the info box for your HBA (see screendump below)
What is the latest version of HP-UX?
11i v3
A major contributor to this article appears to have a close connection with its subject.
Developer | Hewlett Packard Enterprise |
---|---|
Source model | Closed source |
Initial release | 1982 |
Latest release | 11i v3 May 2021 Release Edition 1 / May 2021 |
Marketing target | Server |
How do I find my HBA firmware version on Windows?
In right pane of Device manager you will see SCSI and RAID Controller, expand it and right click on appropriate HBA – and check PROPERTIES. You will see Driver tab, and the version of HBA Windows driver is listed there.
How do I know what architecture my HP UX is?
Just run command “model” to know which architecture your server have.
What Unix version do I have?
What are the two major Unix system versions?…Which is the latest version of Linux?
Release | General Availability Date | Kernel Version |
---|---|---|
RHEL 7.7 | 2019-08-06 | 3.10.0-1062 |
RHEL 7.6 | 2018-10-30 | 3.10.0-957 |
RHEL 7.5 | 2018-04-10 | 3.10.0-862 |
RHEL 7.4 | 2017-07-31 | 3.10.0-693 |
What is HP-UX server?
Hewlett-Packard Unix (HP-UX) is an implementation of the Unix operating system that is based on the UNIX System V, developed by Hewlett-Packard and first released in 1984. It was originally developed for HP’s proprietary Integral PC and then made to run on 9000 series business servers.
How do I check my BIOS HBA?
Select the HBA for the startup device. a. During the startup of the application server, press ALT+E to go to the BIOS setting page. The system displays the HBA of the current system, as shown in Figure 6.
How can I check my FC card status in Windows?
run “fcinfo” command in Command Prompt. It will show up HBA connected to the server with WWN.
How do I know if my OS is Unix or Linux?
How to find your Linux/Unix version
- On command line: uname -a. On Linux, if the lsb-release package is installed: lsb_release -a. On many Linux distributions: cat /etc/os-release.
- In GUI (depending on GUI): Settings – Details. System Monitor.