How do I reset a Pro 106 scanner?

How do I reset a Pro 106 scanner?

To reset (clear) the user’s programming, turn the scanner on and, while the “welcome display” is shown, press 0 then 1 then ENTER. All user data will be reset to factory defaults. Firmware and “V-Scanner data” will not be affected.

How do you reset a Pro 651 scanner?

A factory reset can be performed by pressing 0, then 1 as the scanner powers up. Then follow the screen prompts.

How do you reset the scanner on a 96 pro?

Member

1. Turn off the scanner, then turn it on again. The scanner briefly displays the DSP boot version, then the WELCOME screen.
2. Press “0” (zero) while on the WELCOME screen. The scanner displays: System Tests. Select Test.
3. Press “1” (one). The scanner displays: Factory Init. Erase Memory.
4. Press ENTER. The scanner displays:

How do you reset the scanner on a HP Pro 163?

To Initialize the scanner, turn off the scanner then turn it back on. Press 0 when the welcome screen appears. ‘Please select factory tests. Exit if no key is pressed’ will briefly appear.

How do I reset my Radio Shack Pro 197 scanner?

Member

1. Turn off the scanner, then turn it on again. The scanner briefly displays the DSP boot version, and then the.
2. Press 0 while the scanner is displaying the Welcome/Owner. screen.
3. Press 1.
4. Press ENT.
5. Press any key on the keypad to proceed.
6. Press any key on the keypad to proceed. The scanner will reboot.

How do I reset my Whistler ws1010 scanner?

Also, to reset is easy. When you first turn on the scanner at welcome screen press 0, then 1, then enter. This will factory reset it.

How do you program a triple trunking scanner?

1. Press PROG, then press TRUNK.
2. Press FUNC, then use an UP or DOWN ARROW to select a bank.
3. Repeatedly press MODE to select a trunking mode (Motorola, EDACS,LTR).
4. Press PROG.
5. Enter the first control channel freq.
6. Repeatedly press MODE to select a trunking mode (Motorola, EDACS, LTR).

What kind of scanner is a pro 106?

The Pro-106 was manufactured for Radio Shack by GRE America Inc. The pro-106 is a Digital Trunk Tracking scanner has the ability to track APCO 25 digital trunking systems, in addition to following Motorola type I/II systems, LTR and EDACS trunking systems.

What is the pro-106?

The pro-106 is a Digital Trunk Tracking scanner has the ability to track APCO 25 digital trunking systems, in addition to following Motorola type I/II systems, LTR and EDACS trunking systems. It is functionally identical to the PSR-500and the later Whistler WS1040. It uses the same software and cables.

What is the pro-106 digital trunk tracking?

The pro-106 is a Digital Trunk Tracking scanner has the ability to track APCO 25 digital trunking systems, in addition to following Motorola type I/II systems, LTR and EDACS trunking systems. It is functionally identical to the PSR-500and the later Whistler WS1040.

How do I reset the radio to default settings?

Turn the radio off then back on and press 0 then 2 during the welcome screen. Press ENT to confirm the global parameter reset then ENT again to reboot.